DOL 139 CO2 Humidity and Temperature Sensor

Manufacturer item no.: 140246The DOL 10 is a simple temperature sensor. This sensor is well suited for use in environments that require a robust design and fast response time.The temperature sensor is used to measure the inside and outside temperature and has an accuracy of + 0.5 °C.The sensor has a temperature range of minus 40 to plus 60 °C and is protected according to IP67.The DOL 10 comes with a 1.5 meter cable. (Optional 5 meter cable, please inquire)TECHNICAL DATAelectricMeasuring range -40°C to +60°CAccuracy ±0.5°CEnvironmentAmbient temperature, operation and storage -40°C to +60°CProtection class IP 67sensor properties-40℃ 82.50kΩ 8.08V0°C 32.91kΩ 6.37V60°C 6.59kΩ 2.68V Illustration similar

Manufacturer item no.: 140200 (Alternative for 140207, 140203, 140295)The DOL 12 temperature sensor is a simple temperature sensor. This sensor is well suited for use in environments where a robust design is required and can be used in temperatures between minus 40 and plus 100 °C.The sensor can be used to measure both indoor and outdoor temperature and is supplied with a 1.5 meter 2-wire cable.The DOL 12 sensor is IP 67 protected and has an accuracy of +0.5 °C.TECHNICAL DATAelectric    Measuring range: -40 °C to +100 °C    Accuracy: ±0.5°C    Time constant T63 5 min at 0.5 m/s air speedEnvironment    ambient temperature. Operation and storage: -40 °C to +100 °C    protection class. Electronics: IP 67    Length: diameter 75mm. 14mm    Two-core cable. 1.4m. Diameter 5mmsensor properties    -40℃ 82.50kΩ 8.08V    0°C 32.91kΩ 6.37V    60°C 6.59kΩ 2.68V

Manufacturer item no.: 140283 DOL 139 is a sensor for measuring carbon dioxide/CO2, relative humidity and temperature. The sensor is used to monitor and control homes and industrial environments. The sensor is protected by a sturdy housing and behind a carefully selected filter. The sensor comes with cable and a cap to protect the sensor -ring washing and disinfection.  TECHNICAL SPECIFICATIONS Output voltage range: 0 - 10 VDC Limited output power per port: 20 mA Output Impedance: <1Ω Recommended load impedance: >100 kΩ max. Cable length: at 1.50 mm2 200m Load Impedance: >0.5kΩ Relative humidity: measuring range 0-100%RH Resolution: 0.1V/%RH Accuracy: +10 °C - +40 °C (40-80%RH)+/-3 %RH Accuracy: 10% RH - 95% RH +/-3 + 0.02 x measured value %RH Time constant: T63: 4 min at 0.5 m/s air speed Temperature measuring range: -40 – +60 °C Resolution: 0.1V/AC Accuracy: +10°C - +40°C +/-0.75°C Accuracy 0°C - +60°C +/-1.5°C Time constant T63 7 min at 0.5 m/s Air velocity CO2 measurement range 0-10000ppm Resolution: 0.001V/ppm Accuracy: 400 - 10000 50ppm + 5% of reading Time constant T63: 2 min at 0.5 m/s air speed Supply voltage: 13.5 - 30 VDC Supply current idle: 9 mA maximum load: 105mA Temperature operation CO2: 0 - +50 °C temperature, Operation: -40 - +60 °C temperature, Storage: -40 - +70 °C IP classification: IP67 (DIN 40050-9) NEMA-1, 3, 4, 6 Illustration similar

Manufacturer Art. No. 140231DOL 19 is a carbon dioxide/CO2 sensor intended for measurements in barn and industrial environments. The measuring range of the sensor has been carefully selected to ensure the comfort of the animals and also to monitor possible error conditions in direct combustion housing. The sensor is protected by a sturdy housing and is behind a carefully selected filter. The sensor is supplied with a plug and cableTECHNICAL DATAReadings:    Measuring principle Non-Dispersive Infrared Technology (NDIR)    Measuring range: 0...10,000 ppmAccuracy at 25 °C (77 °F) and 1013 mbar:    0-7000: 50ppm +5% of reading    7,000-10,000: 100ppm +5% of reading    Temperature dependency: type. 1ppm CO2/°C (-20…45°C)    Sample rate: Approx. 15 sec    Analog output: 0...10,000 ppm voltage 0 - 10 V and current 4 - 20 mA    Load: > 10 kΩ ≤ 500 Ω    Recommended burden: ≥ 100 kΩ 500 ΩGenerally    Supply voltage: SELV 15 – 35 V DC SELV = Safety Extra Low Voltage    Power supply voltage output: Typ. 16mA current output: max. 36mA    max. 0.5 A in 0.3 s max. 0.5 A in 0.3 s    Warm-up time: < 5 min    Housing / protection class polycarbonate / IP54    Electrical connection Cable with M12 connector    cable 2m. 4 x 22AWG / 0.34mm2    Electromagnetic compatibility EN 61326-1    EN61326-2-3    working temp. and conditions -20...60 °C (-4...140 °F) 0...100 % RH (non-condensing)    storage temperature. and conditions -20...60 °C (-4...140 °F) 0...95 % RH (non-condensing)